Thermo Valves

Pictures and details about Thermo Valves

Thermo Valves

Use the return button to get back to the page you were on.

Deluxe K Valve
VA100

  • Standard yoke outlet
  • 3/4" - 14 NPSM inlet
  • Air service
  • Dip tube included (not shown)
  • Service pressure: 2400, 3000 psi


International DIN/Yoke Valve
VA200

  • Standard yoke outlet w/spin-out adapter converts to 230 bar DIN outlet
  • 3/4" - 14 NPSM inlet
  • Clean for pre-blended Nitrox up to 40% FO2
  • O-ring sealed bonnet
  • Easy grip rubber handwheel
  • Dip tube included (not shown)
  • Service pressures: 2400, 3000, 3442 psi
  • Nitrox Ready


300 bar DIN Valve
VA300

  • Dedicated 300 bar DIN outlet
  • 3/4" - 14 NPSM inlet (standard)
  • 7/8" - 14 UNF inlet (small hole)
  • VA300 is clean for pre-blended Nitrox up to 40% F02
  • VA378 is clean for compressed air only
  • Dip tube included (not shown)
  • Service pressures: 3000, 3500, 4350 psi


Modular International Valve
VA200L, VA200R

  • Standard yoke outlet w/spin-out adapter converts to 230 bar DIN outlet
  • Plug included
  • 3/4" - 14 NPSM inlet
  • Clean for pre-blended Nitrox up to 40% FO2
  • Dip tube included (not shown)
  • Service pressure: 2400, 3000, 3442 psi



Modular DIN Valve
VA300

  • Dedicated 300 bar DIN outlet
  • Plug included
  • 3/4" - 14 NPSM inlet (VA300)
  • Clean for pre-blended Nitrox up to 40% FO2
  • Dip tube included (not shown)
  • Service pressure: 3442 psi



Crossbar
VC0V0

  • Connects Right & Left modular valves together to build a manifold
  • 8.46" C-2-C with isolator valve (VC0V0)
  • 7.28" C-2-C without isolator valve (VC0S0)
  • Double barrel o-ring seal
  • Clean for pre-blended Nitrox up to 40% FO2



H Adapter
VH200

  • Standard yoke outlet w/ spin-out adapter converts to 230 bar DIN outlet
  • Attaches to all Modular valves
  • Clean for pre-blended Nitrox up to 40% FO2



H Adapter
VH300

  • Dedicated 300 bar DIN outlet
  • Attaches to all Modular valves
  • Clean for pre-blended Nitrox up to 40% FO2

 



  • Modular valves are clean for pre-blended Nitrox up to 40% FO2
  • Modular valves are set for 3000 psi service pressure
  • Modular valves have a 3/4" x 14 NPSM inlet thread
  • Double barrel o-ring adjustable cross bars
  • Burst discs are available to change the service pressure
  • PRO Outlet - Yoke outlet with spin-out adapter to 230 bar DIN
  • DIN Outlet - Dedicated 300 bar DIN outlet
Right Hand
Cross Bar
Left Hand

- The above components can be combined
to make the manifolds below -




Right handed (R)
components can be
combined to make
make RIGHT H valves




Left handed (L)
components can be
combined to make
make LEFT H valves




Modular plugs can be installed into the valve barrel when the H-adapter is removed, or when manifolds are disassembled for single tank usage. Modular valves contain a valve plug when shipped from XS Scuba.
Right Hand

VPLUG-R

This nut has small "notches" perpendicular to wrench flats to identify the Right Hand (R) designation
Left Hand

VPLUG-L

This nut does not have the small "notches" to identify the Left Hand (L) designation
The "jam nuts" on the Crossbar and on the H-adapters also have the notch(R) and no-notch(L) identification. This helps to make sure that Rights go with Rights and Lefts go with Lefts. Always make sure you thread your valves together correctly, otherwise damage to the threads may occur.