SeaCure, the comfortable mouthpiece
The only mouthpiece GUARANTEED
to fit you....PERFECTLY!
That's right. The SeaCURE Custom Mouthpiece molds to fit your mouth, teeth, gums andjaws! It is scientifically designed by an orthodontist to use your entire jaw for maximumretention and control of the mouthpiece-regulator unit of your SCUBA equipment... without thejaw fatigue and headache pain sometimes experienced with conventional mouthpieces.
The SeaCURE Custom Mouthpiece is easily molded to fit you precisely! It is safe,durable and reliable. It fits most regulators.
Above all, the SeaCURE Custom Mouthpiece is a mouthful of diving comfort!
Electromyographic tests of divers in the laboratory using both conventional andSeaCure Custom mouthpieces showed that significantly less muscle effort was required to retaina SeaCure mouthpiece with regulator in the mouth than was needed to retain a conventionalmouthpiece/regulator unit. Result: incredible comfort.
You are absolutely correct that SeaCURE is the most comfortable mouthpiece available.Until I found your product, I had tried every other type of mouthpiece available, and they all leftme with jaw fatigue after four or five dives in one day. Now I'm able to dive as much as I wantwithout any discomfort at all.
Had a hard time getting the SeaCure mouthpiece away from my husband! Hear himcrying?
We have been absolutely delighted with our SeaCURE mouthpieces. The difference interms of comfort and jaw fatigue is significant - all for the better.
SeaCURE mouthpiece is truly the most comfortable mouthpiece I have ever used. With theabsence of jaw fatigue that I had with other mouthpieces, I can now enjoy diving more and whenteaching my students, my concentration is not diverted to sore jaw muscles.
I found SeaCure as comfortable as advertised. I had to go back to a traditional mouthpieceon a recent dive trip. After a couple of days I realized something wasn't the same. Guess what! Itwas the mouthpiece! I look forward to getting back to my SeaCure!
I find it very difficult to dive with any other mouthpiece after using SeaCURE. Headachesand jaw fatigue are a thing of the past.
Only $32.00 plus $7.00 S/H in the US.
See below for sizes and ordering instructions if you would like to try this marvelousinvention.
Regulator Sizes / Mounting Seacure
All models, SeaCure I, SeaCure II, and SeaCure III have identical fully custom bite wingswhich are heat moldable to fit every individual diver's mouth, teeth and jaw. The only differenceis the size or shape of the opening which mounts on the regulator mouthpiece fitting.
SEACURE I - fits standard orifice regulators that have a conventional mouthpiece retentionlip.
Apollo; Bridgestone; Coral; Dacor (new Pacer model; not older Pacer); Beuchat (VS-3,4 &5);
Cressi-Sub: IDI: Parkway; Halcyon rebreather; Pro Sub (Avalon); NDS; Nemrod; ScubaPro; SEAC;
SAS; Sherwood; (most earlymodels/brue/magnum 1 1/Oasis/ pre 1992 Blizard); Tabata/Tusa 500 series;
early metal U.S. DIVER models; and other standard size orifice regulators.
(Seacure cannot be used on aero model DACOR because of holes in body of mouthpieceorifice.)
SEACURE II - fits intermediate size air orifice regulators.
Apex; Atomic Titanium; Beuchat (VS-6 & 10); Chiaro; Mares newer model but not on Mares MR 12II, III, Ivory; Ist; Oceanedge; Tekna; Oceanic; Prosub (Larger size); Seaquest (not Airsource); Sherwood Maximum Oasis 2/1992, Newer blizzard, Nue Maximus requires professional model only; the diver can grind one side of the internal core of the outhpiece to maintian any venturi effect.); ZEAGLE and other intermediate size orifice regulators.SEACURE III- fits only U.S. Diver plastic regulators
U.S. DIVER regulators do not have the conventional retention lip on the mouthpiece orificecommon to all other regulators and therefore no other seacure model should be used on theseregulators.
POSEIDON/SHERWOOD ULTIMA
While SeaCure is not designed to fit Poseidon or Sherwood Ultima, many divers are now usinga SeaCure II with these regulators. It takes considerable extra effort and strength to mount theSeaCure II, but it will go on the plastic models, not on early metal units. (Never place the regulatorend of SeaCure into boiling water but hot tap water on it for a brief time and a small amount of soapon the orifice may also help. No other lubricant should be used.) DO NOT USE SPORT MODEL ON ANY POSIEDON OR SHERWOOD ULTIMA (IT WILL SPLIT!)
SEACURE III - fits U.S. diver plastic regulators, New Sea Quest, Genesis & SEa Mech.
U.S. Divers reglators do not have the conventional retention lip on the mouthpiec orifice common to all other regulators, and therefore no other seacure model should be used on them.SNORKELS
SeaCure fits removable mouthpiece snorkels on the market. The SeaCure model that fits isnoted where known.
AMICO (I); DACOR - 3 models (I); NETEX (I); PARKWAY (II); PIC (II); SEAQUEST (I);TECHNISUB (II); TRIDENT; U.S. DIVER (III).
Regulator or Snorkel Not Listed above, if possible, try both SeaCure I and SeaCure IIon the unit in question to see which fits.
Otherwise, simply measure the retention lip on the air orifice of the regulator.
The results of a recent survey of regulators indicate that almost all fall into two general sizeswith some in each group being slightly larger or smaller than the average.
Click here to use a secure, encrypted major credit card form.
You may send an order by mail to:
Oceanco Ltd.
PO Box 970562
Boca Raton, FL 33497
Please add your E-mail address and/or telephone number, if you have one, in case we have question about the order.
Use this to send us questions or comments."Go back to the front of the dive shop"Go to the Dive Site for many items of interest to SCUBA divers"Open the front of TouristGuide Magazine."You'll find all kinds of FREE information of importance when planning any trip